Drawmer DL-251
Dynamikprozessor
Spezieller 2-Kanal Spectral Compressor, der die geringere Energie im Hochtonbereich berücksichtigt und somit bei der Compression ausgleicht.
INPUT IMPEDANCE 22K Ohm
MAXIMUM INPUT LEVEL +21dBu (+17dB ref. +4dBu)
OUTPUT IMPEDANCE 50 Ohm
MAXIMUM OUTPUT LEVEL +20dBu
BANDWIDTH <12Hz to 25KHz -1dB
CROSSTALK @10kHz Better than -80dB
@20kHz Better than -70dB
NOISE AT UNITY GAIN reference +4dBu
Wideband 22Hz - 22KHz CCIR ARM IEC A Q-Pk CCIR
AV -88dB -94dB -95dB -98dB -84dB
RMS -86dB -92dB -93dB -96dB -
DISTORTION (No Compression and Enhance Off)
100Hz 1KHz 10KHz
Unity Gain, +4dBu Input < 0.09% < 0.03% < 0.08%
+14dBu Input, 10dB G.R. < 0.15% < 0.15% < 0.15%
POWER REQUIREMENTS 115Volt or 230Volt at 50-60Hz, 10 Watts
FUSE RATING 50mA for 230Volt, 100mA for 115Volt
CONFORMING TO BS EN 60127-2:1991 SHEETIII
FUSE TYPE 20mm x 5mm, Class 3 Slo-Blo, 250Volt working
CASE SIZE 482mm (w) x 44mm (h) x 200mm (d)
WEIGHT (incl packaging) 3.4 Kgs
MAXIMUM INPUT LEVEL +21dBu (+17dB ref. +4dBu)
OUTPUT IMPEDANCE 50 Ohm
MAXIMUM OUTPUT LEVEL +20dBu
BANDWIDTH <12Hz to 25KHz -1dB
CROSSTALK @10kHz Better than -80dB
@20kHz Better than -70dB
NOISE AT UNITY GAIN reference +4dBu
Wideband 22Hz - 22KHz CCIR ARM IEC A Q-Pk CCIR
AV -88dB -94dB -95dB -98dB -84dB
RMS -86dB -92dB -93dB -96dB -
DISTORTION (No Compression and Enhance Off)
100Hz 1KHz 10KHz
Unity Gain, +4dBu Input < 0.09% < 0.03% < 0.08%
+14dBu Input, 10dB G.R. < 0.15% < 0.15% < 0.15%
POWER REQUIREMENTS 115Volt or 230Volt at 50-60Hz, 10 Watts
FUSE RATING 50mA for 230Volt, 100mA for 115Volt
CONFORMING TO BS EN 60127-2:1991 SHEETIII
FUSE TYPE 20mm x 5mm, Class 3 Slo-Blo, 250Volt working
CASE SIZE 482mm (w) x 44mm (h) x 200mm (d)
WEIGHT (incl packaging) 3.4 Kgs
Feedback liegt uns am Herzen! Wir würden uns freuen, wenn Sie sich Zeit für diesen KLICK nehmen, um uns auf Fehler hinzuweisen.
